Non-Root Accounts Have UID Set To0

#6.5: Make Sure No Non-Root Accounts Have UID Set To0
Only root account have UID 0 with full permissions to access the system. Type the following command to display all accounts with UID set to 0:
# awk -F: ‘($3 == “0″) {print}’ /etc/passwd
You should only see one line as follows:
root:x:0:0:root:/root:/bin/bash
If you see other lines, delete them or make sure other accounts are authorized by you to use UID 0.

Install Mod_Security

ModSecurity is a free open source web application firewall which can help you to guard against LFI (local file inclusion attacks) and SQL injection vulnerabilities.
CPanel Installation:
Just go to Cpanel WHM > Plugins > Enable Mod_Security > Save
Source Installation:
That should install mod security in your cpanel. Under apache it should show under installed modules if you run test.php with phpinfo() in it. Try adding some mod security rules. Installing mod_security could be sometimes complicated. Dont use apxs for compiling mod_security as it causes number of problems.
Note: Mod_security needs libxml2 and http-devel libraries before it can be installed. It also requires mod_unique_id enabled in apache modules. To install mod_unique_id, you have to place
LoadModule unique_id_module modules/mod_unique_id.so
in your httpd.conf file.

yum install libxml2 libxml2-devel httpd-devel

Download the latest version of mod_security for apache2 from http://www.modsecurity.org

wget http://www.modsecurity.org/download/modsecurity-apache_2.1.7.tar.gz
tar zxf modsecurity-apache_2.5.4.tar.gz
cd modsecurity-apache_2.5.4
cd apache2

Then
If you cannot find ./configure then you will need to edit Makefile and make change to top_dir = /usr/lib/httpd (for centos)

make
make install

Next, copy the rule files depending on which you want (you can also select minimal rules file which comes with source). Make a directory named modsecurity under /etc/httpd/conf and copy all the modsecurity rules there. Finally include those files in the httpd.conf file
# /etc/httpd/conf/httpd.conf

LoadModule unique_id_module modules/mod_unique_id.so
LoadFile /usr/lib/libxml2.so
LoadModule security2_module modules/mod_security2.so
Include conf/modsecurity/*.conf

Then

/etc/init.d/httpd restart

Log Files
Watch for log files to detect any errors or intrusion activity
/var/log/httpd/modsec_audit
/var/log/httpd/error_log

Refer:http://www.mysql-apache-php.com/basic-linux-security.htm

Upgrade PHP5.1 to PHP5.2 on CentOs 5.6

PHP Upgrade

# rpm -qa |grep php

 php-common-5.1.6-15.el5.i386
 php-cli-5.1.6-15.el5.i386
 php-5.1.6-15.el5.i386
 php-pdo-5.1.6-15.el5.i386
 php-bcmath-5.1.6-15.el5.i386
 php-ldap-5.1.6-15.el5.i386
 php-devel-5.1.6-15.el5.i386
 php-gd-5.1.6-15.el5.i386
 php-xml-5.1.6-15.el5.i386
 php-mbstring-5.1.6-15.el5.i386
 php-mysql-5.1.6-15.el5.i386
 php-dba-5.1.6-15.el5.i386

As long as you're using the standard PHP packages on your CentOS server you won't need to do anything extra. If you're using extra PHP packages that aren't part of the standard CentOS repositories (like php-mcrypt) you'll have to remove them or find updated versions of them.

Add the development repositories

First thing we need to do is add the development repositories to yum. When we add the development repository we're going to configure it so it only pulls PHP packages. To start we'll need create a new yum repository configuration file (use your favorite editor):

 # /etc/yum.repos.d/CentOS-Testing.repo

Copy/paste the following into this file:

  # CentOS-Testing:
  # !!!! CAUTION !!!!
  # This repository is a proving grounds for packages on their way to CentOSPlus and CentOS Extras.
  # They may or may not replace core CentOS packages, and are not guaranteed to function properly.
  # These packages build and install, but are waiting for feedback from testers as to
  # functionality and stability. Packages in this repository will come and go during the
  # development period, so it should not be left enabled or used on production systems without due
  # consideration.
  [c5-testing]
  name=CentOS-5 Testing
  baseurl=http://dev.centos.org/centos/$releasever/testing/$basearch/
  enabled=1
  gpgcheck=1
  gpgkey=http://dev.centos.org/centos/RPM-GPG-KEY-CentOS-testing
  includepkgs=php*

Make sure to remove any spaces at the start of each line, then save and close the file and you're done.

Update PHP packages

Before updating your PHP packages you'll want to get a list of what you currently have installed. To get a list of current PHP packages run the following:

 # rpm -qa |grep php

Now you can use yum to update the PHP packages on your system:

 # yum update

You should be shown a list of packages that are going to be updated. Compare it to the list of PHP packages on your system. Note any packages that are not in the list. You'll need to remove these packages or find updates for them because they won't work after you update to PHP 5.2.x. If that is acceptable type "y" to continue and let yum update the packages.

Once yum has completed restart Apache:

 # service httpd restart

To verify the update is working create a simple testing.php in your www directory with the following source code:

<?php
  phpinfo();
?>

and open it in a web browser. The new PHP version should be reflected at the top of the page.

Conclusion

You should now have PHP 5.2.6 running on CentOS 5.3 32-bit.

 # rpm -qa |grep php

  php-cli-5.2.6-2.el5s2
  php-mbstring-5.2.6-2.el5s2
  php-devel-5.2.6-2.el5s2
  php-pdo-5.2.6-2.el5s2
  php-gd-5.2.6-2.el5s2
  php-dba-5.2.6-2.el5s2
  php-common-5.2.6-2.el5s2
  php-bcmath-5.2.6-2.el5s2
  php-xml-5.2.6-2.el5s2
  php-pear-1.5.1-2.el5s2
  php-ldap-5.2.6-2.el5s2
  php-5.2.6-2.el5s2
  php-mysql-5.2.6-2.el5s2


 # php -v

  PHP 5.2.6 (cli) (built: Sep 15 2008 20:42:05)
  Copyright (c) 1997-2008 The PHP Group
  Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies

Note: If your "php -v" output returns errors about PDO or JSON click here

Extras

Updating/Installing mcrypt

If you have php-mcrypt for PHP 5.1.x installed you'll want to remove it:

Note: Your version number maybe different. Alter below command accordingly.

 rpm -e php-mcrypt-5.1.6-15.el5.centos.1

Download php-mcrypt for PHP 5.2.x and install it. You can find a 32-bit php-mcrypt package here FedoraJunkies.

Note: You'll notice the "--nodeps" flag in the example. When you try to install php-mcrypt without it you get an error that php-common-5.2.6-2.el5s2 is missing even though it is installed.

 wget -c http://sourcemirrors.org/scotth/centos/5/php/php-mcrypt-5.2.6-2.i386.rpm
 rpm -i --nodeps php-mcrypt-5.2.6-2.i386.rpm

Restart Apache and you should now see mcrypt information on your testing.php page.

JSON and PDO being loaded twice

When you run the command "php -v" you might see the following errors:

 # php -v

  PHP Warning:  Module 'json' already loaded in Unknown on line 0
  PHP Warning:  Module 'PDO' already loaded in Unknown on line 0
  PHP 5.2.6 (cli) (built: Sep 15 2008 20:42:05)
  Copyright (c) 1997-2008 The PHP Group
  Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies

This is caused by the following two lines in the /etc/php.ini file:

; Extension JSON
extension=json.so

; Extension PDO
extension=pdo.so

Comment out these lines by adding a ";" in front of "extension=". These two modules are already loaded via these two files:

/etc/php.d/json.ini
/etc/php.d/pdo.ini

Installing phpMyAdmin on CentOS 5.6

Install MySQL packages
# yum install mysql-server mysql mysql-devel

Make MySQL boot up automatically
# chkconfig mysqld on

Start MySQL service
# service mysqld start

Set the password for the root user
# mysqladmin -u root password kezhong

Install php and common packages
# yum install php php-gd php-imap php-mysql php-pear php-xml phpxmlrpc curl libxml2 php-mbstring php-mcrypt

Install phpMyAdmin
Because the version of php on CentOS 5.6 is 5.1.6, we only can install phpMyAdmin 2.x, I choose 2.11.11.3.
# cd /usr/share
# wget http://sourceforge.net/projects/phpmyadmin/files/phpMyAdmin/2.11.11.3/phpMyAdmin-2.11.11.3-english.tar.gz/download
# tar xvfz phpMyAdmin-2.11.11.3-english.tar.gz
# mv phpMyAdmin-2.11.11.3-english phpmyadmin
# rm phpMyAdmin-2.11.11.3-english.tar.gz
# cd phpmyadmin
# cp config.sample.inc.php config.inc.php

Edit the config.inc.php file, find the line that contain “blowfish_secret”, and modify like below.
$cfg['blowfish_secret'] = ‘TypeAnything_for_Secure’;

Append a line into the /etc/httpd/conf.d/phpmyadmin.conf file
# echo “Alias /phpMyAdmin /usr/share/phpmyadmin” >> /etc/httpd/conf.d/phpmyadmin.conf

Restart the httpd service
# service httpd restart

Enter the URL http://[IP Address]/phpMyAdmin/ on Firefox browser, we’ll can see the login web page.

Installing VNC server in UBUNTU 11.04

1. sudo apt-get install vnc4server

2. vncserver -geometry 1280x1024 -depth 24

3. vncserver -kill :1

4. vi .vnc/xstartup

Note :This will open up the file we need to edit.
Scroll down to the line which currently reads #unset SESSION_MANAGER and press the [Insert] key once (this will switch us into "edit" mode) and then remove the #

Do the same for the line after that. Plus change that line to read as follows:

exec sh /etc/X11/xinit/xinitrc

Note the "sh".

Change the xterm -geometry line as below

Once you've made these changes the file should look like this:

#!/bin/sh

# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec sh /etc/X11/xinit/xinitrc
[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
xterm -geometry 1280x1024+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &

5. vncserver -geometry 1280x1024 -depth 24

6. vncpasswd 

Try to connect the sever from vnc viewer with x.x.x.x:1 and give the password

How To Install FFmpeg, Mplayer, Mencoder, FFmpeg-PHP on CentOS 5.x

In this how to i will describe how to install ffmpeg, mplayer, mencoder, flvtool2, ffmpeg-php with all supported codecs to convert / manipulate videos easily on CentOS 5.x. If you want to run sites like youtube e.g www.indianpad.in, www.danceindiadance.in this howto will help you to install the base for your software. There are many other way to perform this but this works for me, so i want to share.

1 Setting Up RPMForge Respository.

RPMForge repository (http://dag.wieers.com) is the biggest rpm respository for RHEL, CentOS for all versions. To enable RPMForge respository run following command to install all necessary files for getting RPMForge repository. The following command directly install rpm from http://da.wieers.com site.

For i386/i686

rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm

For x86_64

rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS//rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm

This rpm will add necessary files in our repository configuration and can be viewed at /etc/yum.repos.d/rpmforge.repo

2 Install ffmpeg, mplayer, mencoder with all supported modules.

Now we have rpmforge repository, so we will use yum to install ffmpeg, mplayer, mencoder as well as all dependent software.

yum -y install ffmpeg ffmpeg-devel mplayer mencoder flvtool2

This command will some time to download and install all packages depends on your internet speed.

3 Install FFMPEG-PHP

ffmpeg-php is an extension for PHP that adds an easy to use, object-oriented API for accessing and retrieving information from video and audio files. ffmpeg-devel and php-devel is needed to compile ffmpeg-php from source code. Use following steps to install ffmpeg-php

cd /usr/src
wget http://garr.dl.sourceforge.net/sourceforge/ffmpeg-php/ffmpeg-php-0.6.0.tbz2
tar jxvf ffmpeg-php-0.6.0.tbz2
cd ffmpeg-php-0.6.0
phpize
./configure
make
make install

It will copy the ffmpeg.so module in php default module location. Now you have to edit php.ini file to enable ffmpeg-php support in it by using ffmpeg.so module.

vi /etc/php.ini

and append following line

extension=ffmpeg.so

Restart apache service to take effect of php.ini

/etc/init.d/httpd restart

Run following command to ffmpeg module listing in php.

php -m | grep ffmpeg

Note : If you get  error after “make” command

[root@server ffmpeg-php-0.6.0]# make
/bin/sh /usr/src/ffmpeg-php-0.6.0/libtool –mode=compile cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg-php.c -o ffmpeg-php.lo
mkdir .libs
cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg-php.c -fPIC -DPIC -o .libs/ffmpeg-php.o
/bin/sh /usr/src/ffmpeg-php-0.6.0/libtool –mode=compile cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg_movie.c -o ffmpeg_movie.lo
cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg_movie.c -fPIC -DPIC -o .libs/ffmpeg_movie.o
/usr/src/ffmpeg-php-0.6.0/ffmpeg_movie.c: In function ‘_php_read_av_frame’:
/usr/src/ffmpeg-php-0.6.0/ffmpeg_movie.c:1215: warning: ‘avcodec_decode_video’ is deprecated (declared at /usr/include/libavcodec/avcodec.h:3454)
/bin/sh /usr/src/ffmpeg-php-0.6.0/libtool –mode=compile cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c -o ffmpeg_frame.lo
cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c -fPIC -DPIC -o .libs/ffmpeg_frame.o
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c: In function ‘zim_ffmpeg_frame_toGDImage’:
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c:336: error: ‘PIX_FMT_RGBA32′ undeclared (first use in this function)
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c:336: error: (Each undeclared identifier is reported only once
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c:336: error: for each function it appears in.)
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c: In function ‘zim_ffmpeg_frame_ffmpeg_frame’:
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c:421: error: ‘PIX_FMT_RGBA32′ undeclared (first use in this function)
make: *** [ffmpeg_frame.lo] Error 1
==========================
Open the file under ffmpeg-php source directory
vi ffmpeg_frame.c
and replace all PIX_FMT_RGBA32 to /PIX_FMT_RGB32
or you can use search and replace like this
:%s/PIX_FMT_RGBA32/PIX_FMT_RGB32

How To Install FFmpeg, Mplayer, Mencoder, FFmpeg-PHP on CentOS 5.x

In this how to i will describe how to install ffmpeg, mplayer, mencoder, flvtool2, ffmpeg-php with all supported codecs to convert / manipulate videos easily on CentOS 5.x. If you want to run sites like youtube e.g www.indianpad.in, www.danceindiadance.in this howto will help you to install the base for your software. There are many other way to perform this but this works for me, so i want to share.

1 Setting Up RPMForge Respository.

RPMForge repository (http://dag.wieers.com) is the biggest rpm respository for RHEL, CentOS for all versions. To enable RPMForge respository run following command to install all necessary files for getting RPMForge repository. The following command directly install rpm from http://da.wieers.com site.

For i386/i686

rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm

For x86_64

rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS//rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm

This rpm will add necessary files in our repository configuration and can be viewed at /etc/yum.repos.d/rpmforge.repo

2 Install ffmpeg, mplayer, mencoder with all supported modules.

Now we have rpmforge repository, so we will use yum to install ffmpeg, mplayer, mencoder as well as all dependent software.

yum -y install ffmpeg ffmpeg-devel mplayer mencoder flvtool2

This command will some time to download and install all packages depends on your internet speed.

3 Install FFMPEG-PHP

ffmpeg-php is an extension for PHP that adds an easy to use, object-oriented API for accessing and retrieving information from video and audio files. ffmpeg-devel and php-devel is needed to compile ffmpeg-php from source code. Use following steps to install ffmpeg-php

cd /usr/src
wget http://garr.dl.sourceforge.net/sourceforge/ffmpeg-php/ffmpeg-php-0.6.0.tbz2
tar jxvf ffmpeg-php-0.6.0.tbz2
cd ffmpeg-php-0.6.0
phpize
./configure
make
make install

It will copy the ffmpeg.so module in php default module location. Now you have to edit php.ini file to enable ffmpeg-php support in it by using ffmpeg.so module.

vi /etc/php.ini

and append following line

extension=ffmpeg.so

Restart apache service to take effect of php.ini

/etc/init.d/httpd restart

Run following command to ffmpeg module listing in php.

php -m | grep ffmpeg

Note : If you get  error after “make” command

[root@server ffmpeg-php-0.6.0]# make
/bin/sh /usr/src/ffmpeg-php-0.6.0/libtool –mode=compile cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg-php.c -o ffmpeg-php.lo
mkdir .libs
cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg-php.c -fPIC -DPIC -o .libs/ffmpeg-php.o
/bin/sh /usr/src/ffmpeg-php-0.6.0/libtool –mode=compile cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg_movie.c -o ffmpeg_movie.lo
cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg_movie.c -fPIC -DPIC -o .libs/ffmpeg_movie.o
/usr/src/ffmpeg-php-0.6.0/ffmpeg_movie.c: In function ‘_php_read_av_frame’:
/usr/src/ffmpeg-php-0.6.0/ffmpeg_movie.c:1215: warning: ‘avcodec_decode_video’ is deprecated (declared at /usr/include/libavcodec/avcodec.h:3454)
/bin/sh /usr/src/ffmpeg-php-0.6.0/libtool –mode=compile cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c -o ffmpeg_frame.lo
cc -I. -I/usr/src/ffmpeg-php-0.6.0 -DPHP_ATOM_INC -I/usr/src/ffmpeg-php-0.6.0/include -I/usr/src/ffmpeg-php-0.6.0/main -I/usr/src/ffmpeg-php-0.6.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/libavcodec/ -I/usr/include/libavformat/ -I/usr/include/libavutil/ -I/usr/include/libswscale/ -I/usr/include/libavfilter/ -I/usr/include/libavdevice/ -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c -fPIC -DPIC -o .libs/ffmpeg_frame.o
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c: In function ‘zim_ffmpeg_frame_toGDImage’:
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c:336: error: ‘PIX_FMT_RGBA32′ undeclared (first use in this function)
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c:336: error: (Each undeclared identifier is reported only once
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c:336: error: for each function it appears in.)
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c: In function ‘zim_ffmpeg_frame_ffmpeg_frame’:
/usr/src/ffmpeg-php-0.6.0/ffmpeg_frame.c:421: error: ‘PIX_FMT_RGBA32′ undeclared (first use in this function)
make: *** [ffmpeg_frame.lo] Error 1
==========================
Open the file under ffmpeg-php source directory
vi ffmpeg_frame.c
and replace all PIX_FMT_RGBA32 to /PIX_FMT_RGB32
or you can use search and replace like this
:%s/PIX_FMT_RGBA32/PIX_FMT_RGB32